1/700重巡洋艦「妙高」 組立編 Building and Upgrading 1/700 Heavy cruiser "Myoko"
HTML-код
- Опубликовано: 5 ноя 2020
- 艦船模型をもっと巷に広めるべく、製作動画をアップしていきます。
第6隻目(№.73)は重巡洋艦「妙高」。
今回は、
組立編
動画になります。
艦船模型の作り方、手順、製作方法、皆様の参考になれば幸いです。
チャンネル登録と評価もどうぞよろしくお願い致します。
blog目指せ百艦:sidonia.blog.fc2.com/
BGM:「d-elf.com」(www.d-elf.com/)by D’elf
In order to spread the ship model more widely, we will upload the production video.
The fifth ship (No. 73) is the heavy cruiser "Myoko".
This time,
Assembly
It will be a video.
We hope that it will be helpful to everyone regarding how to make a ship model, procedures, and manufacturing methods.
Thank you for your channel registration and evaluation.
Aim for the blog Hundred ships: sidonia.blog.fc2.com/
BGM: "d-elf.com" (www.d-elf.com/) by D'elf - Хобби
MYOKO IS MY FAVORITE OF THE I J N. C As X THIS KIT DESERVES TO BE 1:350 , OR LARGER
Your skill is at the highest level. I'm trying to apply some of the things I learn here on my own models. Thank you for showing us how you do it.
Please use more and more techniques that you can use. And let's enjoy the ship model.
制作お疲れ様です、そしてリクエストに対応して頂きありがとうございます。
完成を楽しみに待っています(^^)
現在塗装を終え、ひたすらディテイルアップ作業を行っています。
今回初めて妙高型を作りましたが、高雄型に負けずかっこの良い重巡ですね。完成を楽しみにしていてください。
武装は戦艦より劣るが高速でスマート。巡洋艦ってカッコイイですよね。
Amazing built with a lot of addon i realy love it
Splendid work, congratulations!
Thank you and let me know if you notice any translation errors.
@@tanakahobby sorry for late reply. Your translation is pretty daijoubu this time :)
Very good job. Great 😁
Great job
Thank you and subscribe to the channel
Súper nice Work!
¡Gracias, veamos a continuación!
Superb! I really enjoy your work and those Finemolds parts are sweet.Thank you for the video.👍By the way, my name is Yves, what's your first name, if I may ask?
Hello, Yves. Thank you for enjoying my video. Please call me "Tashan". I look forward to working with you in the future.
@@tanakahobby Thank you Tashan, I'm glad that I found your channel, Best regards, Yves.
Bravo 👍👍
ありがとう、また見てね
妙高 いいですね〜 素晴らしい技術を見せてくださってありがとうございます(=^ェ^=)塗装編楽しみにしてます。怪我には気をつけてくださいね。
数年前からアトピー性皮膚炎みたいに指や手の皮が荒れてめくれるようになりました。それが痛くて絆創膏をしているだけですので、ご安心ください。
Please. Can you explain how do you atach the ship to the base for manipulate ir easily?
Screw from the back of the pedestal.
絵付けは、1945年の 妙高 カモフラージュを作っていますか?
この妙高は1944年時を制作していますので、迷彩ではありませんが、次に制作するときは迷彩にしようと思います。
Can you recommend any websites that sell full hull models?
I'm sorry for the late reply.
This is a site that sells full hull ship models, but if you have to choose one based on completeness, I would still recommend Yahoo Auctions. There are many high level works on display in Japan.
@@tanakahobby thank u
作品を入れるケースはどこのものですか?
たしか妙高を入れたケースはウェーブのTケースのWMだった気がします。
@@tanakahobby 埃を掃除するのが面倒だと母親に叱られそうだったので助かりました。
駆逐艦4隻と重巡2隻を塗装のみの巣組で作り、初めて摩耶で、エッチングに挑戦しました。キットに入っている程度ですが。大失敗でした。コツを教えて欲しいです。
数をこなして慣れるしかないでしょう。あとは自分にあった道具を使うことかなぁ。特にピンセットは大事です。一般的な安物では作業になりません。私はタミヤ製を愛用していますが、もっと良い物がないかちょくちょく探しています。
I'm a beginner too, in small scale ship modeling with etch parts, the start was really hard, I couldn't bend the parts properly, plus my sight is not good, but I'm getting better. Three things are important, for me, a quiet room, relaxing music and short sessions of etch parts, one piece at a time...
私も初心者ですが、エッチングパーツを使った小規模な船のモデリングでは、スタートがとても難しく、パーツを適切に曲げることができず、視力も良くありませんでしたが、良くなっています。私にとって重要なのは、静かな部屋、リラックスできる音楽、エッチングパーツの短いセッションの3つです。
ありがとうございます。動画を見ると意図も簡単そうに付けてられる様に見えたのですが、大間違いでした。そりゃそうですよねぇ。素人が手を出せる訳ないですよ。でも、動画を手本にコツコツ頑張ってみます。
@@Yves95128 ありがとうございます。50目前の私は細かい作業には老眼鏡が欠かせないですが、初めてのエッチング失敗には、曲げ過ぎて戻したら折れてしまって、難しさを痛感しました。イラッときた時の音楽って
思いつきませんでした。頑張ってみます。
@@user-bx4zx7ez4k 私もアラフィフで同世代です。模型作業にはルーペ必須で、爪切りにも老眼鏡必須です。
細かい作業をコツコツ進めていけばいくほど自分の船が見違えるほど立派になりますので、頑張って。
今度、僕の動画にタナカボビーさんのお名前使用させて頂いてもいいですか?
スモークさんこんにちは。使用するのは自由ですよ。あとアフレコ面白いのでシリーズ化してみては?
@@tanakahobby ありがとうございます!シリーズ化ですかー…面白いと言ってもらえるのは嬉しいのですが、ちょっと難しいかな…ごめんなさい🙇♀️
Can you recommend any websites that sell full hull models?
I'm not sure what you mean, so please let me know the specifics.
@@tanakahobby like a website that sells the full hull model not just waterline like this atago